01. Custom Engineering & Design Capabilities

Material Selection & Compatibility

Material selection is evaluated according to operating temperature, working medium, corrosion conditions, pressure, and mechanical requirements.

Stainless Steel: 304, 304L, 316, and 316L for applications requiring general corrosion resistance and established fabrication characteristics.

Heat-Resistant Stainless Steel: 321 and 310S for selected high-temperature applications, depending on operating conditions and oxidation requirements.

Nickel-Based Alloys: Inconel 625, Hastelloy C-276, and Monel 400 for specific corrosive environments and demanding thermal or mechanical conditions.

Carbon & Low-Alloy Steel: Used for structural components, flanges, tie rods, and supporting parts where the design and media exposure permit.

Material selection is confirmed against the actual chemical composition, concentration, temperature, and exposure conditions. Material traceability and EN 10204 3.1 inspection documentation can be arranged according to project requirements.

Structural Configurations & Custom Dimensions

Product geometry and construction are determined by installation space, pressure requirements, movement capacity, and required flexibility.

Dimensions: Custom inner diameter, outer diameter, wall thickness, overall length, and connection dimensions.

Ply Construction: Single-ply and multi-ply bellows configurations, selected according to pressure, spring rate, and movement requirements.

Braid Reinforcement: Single or double-layer stainless steel wire braiding for flexible metal hose assemblies, subject to pressure and application requirements.

End Connections: Custom flanges, threaded connections, butt-weld ends, socket-weld fittings, and machined adapters.

Surface & Assembly Options: Configurations can be specified according to installation, operating medium, and project requirements.

Movement, Pressure & Fatigue Considerations

Flexible metal components are evaluated according to their combined mechanical and operating conditions.

Movement: Axial compression and extension, lateral deflection, and angular rotation.

Pressure: Working pressure, design pressure, pressure fluctuations, and vacuum conditions where applicable.

Spring Rate: Axial, lateral, or angular stiffness evaluated according to the component configuration and connected equipment requirements.

Fatigue Requirements: Design evaluation based on movement amplitude, operating frequency, temperature, pressure, and specified service cycles.

Vibration: Structural configuration assessed according to vibration characteristics and installation conditions.

Final design parameters are determined through product-specific engineering calculations and applicable design requirements.

02. Engineering Requirements by Product Type

Different flexible metal components have different structural functions and selection criteria. Engineering requirements should therefore be evaluated separately.

Product Category Key Design Parameters Main Engineering Considerations
Metal Bellows Diameter, wall thickness, ply count, convolution geometry, spring rate, stroke Pressure capacity, movement, fatigue cycles, stiffness
Metal Expansion Joints NPS/DN, design pressure, temperature, movement, connection type Thermal expansion, pressure thrust, anchors and pipe guides
Flexible Metal Hoses Inner diameter, length, bend radius, braid layers, end fittings Working pressure, flexibility, kink resistance, flow conditions
Precision Elastic Components Material, thickness, geometry, deflection, load requirements Load-deflection characteristics, dimensional requirements, fatigue

Expansion Joint System Integration

Expansion joints must be evaluated as part of the complete piping system rather than as isolated components.

Anchor Arrangement: Main anchors and intermediate anchors must be considered when evaluating pressure thrust and piping loads.

Pipe Guides: Guide spacing and alignment influence the movement behavior of the expansion joint.

Thermal Movement: Pipe layout and temperature changes determine the required axial, lateral, or angular movement capacity.

Connected Equipment: Nozzle loads and connection conditions should be considered during system design.

Proper system evaluation helps identify potential installation and loading issues before manufacturing.

03. Custom Manufacturing Workflow

Each custom project follows a defined process from technical evaluation to final inspection and delivery.

1. Technical Requirement Assessment

Review customer drawings, CAD files (DWG, DXF, STEP), physical samples, dimensions, operating conditions, and application requirements.

2. Engineering & Feasibility Review

Evaluate material selection, product configuration, wall thickness, pressure requirements, movement capacity, bend radius, and applicable design standards.

3. Technical Drawing Approval

Prepare or review engineering drawings, critical dimensions, tolerances, and inspection requirements for customer approval before production.

4. Manufacturing & Assembly

Manufacturing operations may include metal forming, bellows fabrication, TIG welding, orbital welding, metal wire braiding, machining, and component assembly according to the approved design.

5. Inspection & Testing

Carry out agreed dimensional inspections, visual examinations, pressure tests, leakage tests, and applicable non-destructive testing (NDT).

6. Documentation & Delivery

Prepare agreed quality records, material certificates, inspection reports, and export packaging according to the purchase order and project requirements.

04. Quality Assurance & Inspection

Inspection requirements are established according to product specifications, applicable standards, and the agreed Inspection and Test Plan (ITP).

Material Verification & Traceability

Material Certificates: Review material certificates and heat or batch identification.

Positive Material Identification (PMI): Perform PMI where specified.

Material Traceability: Maintain material traceability according to agreed project requirements.

Inspection Documentation: Provide EN 10204 3.1 material inspection certificates where included in the order.

Dimensional & Manufacturing Inspection

Dimensional Verification: Verify critical dimensions against approved engineering drawings.

Manufacturing Inspection: Inspect forming geometry, connections, and assembly conditions.

Weld Inspection: Check weld appearance and workmanship according to applicable acceptance criteria.

Non-Destructive Testing (NDT)

Liquid Penetrant Testing (PT): Used to identify surface-breaking discontinuities in suitable materials and locations.

Radiographic Testing (RT): Used for weld examination where required by the applicable inspection specification.

Additional inspection methods can be considered according to product design and project requirements.

Pressure & Leakage Testing

Hydrostatic Testing: Test pressure and acceptance criteria determined by the applicable design code and approved ITP.

Pneumatic Leakage Testing: Bubble testing or other agreed methods for evaluating gas leakage.

Helium Leak Testing: Available for applications requiring specified leak-rate verification, subject to agreed test conditions and equipment capability.

Inspection scope, sampling frequency, acceptance criteria, and documentation are confirmed before production.

05. Engineering Applications & Project Solutions

Custom metal components are selected according to equipment design, installation conditions, and operating requirements.

Application Area Typical Component Main Considerations
Power Generation Metal expansion joints and bellows Thermal movement, temperature, pressure, exhaust conditions
Industrial Piping Expansion joints and flexible metal hoses Pressure, piping movement, anchors, media compatibility
Pumps & Compressors Flexible metal hose assemblies Vibration, connection compatibility, pressure, bend radius
Heat Exchangers Metal bellows and expansion joints Thermal expansion, pressure differential, corrosion conditions
OEM Machinery Custom bellows and elastic components Installation dimensions, movement, stiffness, operating cycles
Industrial Maintenance Replacement bellows and hose assemblies Existing dimensions, connection interfaces, material identification

Engineering Design Example – High-Temperature Expansion Joint

For high-temperature exhaust ducting applications, the engineering configuration may involve:

Operating Conditions: Elevated exhaust temperatures, internal pressure, and potentially corrosive flue gas.

Bellows Configuration: Multi-ply metallic bellows considered according to pressure, movement, and fatigue requirements.

Material Selection: Nickel-based alloys such as Inconel 625 may be evaluated for suitable exposed components, subject to service conditions.

Internal Components: Internal liners and suitable connection arrangements considered according to gas flow, thermal expansion, and installation requirements.

Inspection: Material verification, weld inspection, and agreed pressure or leakage testing.

This is an illustrative engineering configuration, not a representation of a completed customer project. Actual materials, dimensions, testing, and acceptance criteria require project-specific confirmation.

06. Technical Information Required for Quotation

Providing complete technical information helps reduce design uncertainty and supports accurate quotation and manufacturing evaluation.

Required Information Details to Provide
Product Type Metal bellows, expansion joint, flexible metal hose, or custom elastic component
Application Exhaust duct, pump connection, piping system, heat exchanger, OEM machinery, etc.
Drawings / Samples PDF, DWG, DXF, STEP files, photographs, or existing part numbers
Material 304, 316L, 321, 310S, Inconel 625, Hastelloy C-276, Monel 400, or required grade
Dimensions Diameter, wall thickness, overall length, connection dimensions
Pressure Working pressure, design pressure, surge pressure, or vacuum requirements
Temperature Normal operating temperature and maximum/minimum temperature
Medium Water, gas, steam, oil, chemicals, corrosive media, or other fluids
Movement Axial, lateral, angular displacement, vibration, and required movement cycles
Connection Flange standard, threaded type, welding connection, or custom interface
Inspection Hydrostatic test, leakage test, PMI, PT, RT, and required certificates

Additional Information by Product Type

For Metal Bellows

Convolution geometry, number of convolutions, axial stroke, lateral offset, spring rate, and required fatigue cycles.

For Expansion Joints

Pipe size and schedule, installation length, movement direction, anchor arrangement, guide layout, and pressure thrust considerations.

For Flexible Metal Hoses

Hose length, minimum bend radius, static or dynamic application, braid configuration, end fittings, and required flow conditions.

If some parameters are unavailable, provide the available drawings, samples, or operating information for an initial engineering assessment.

07. Frequently Asked Questions

Can you manufacture metal bellows, expansion joints, and flexible metal hoses according to customer drawings?

Yes. Custom manufacturing can be evaluated using customer drawings, CAD files, physical samples, or detailed application specifications. Critical dimensions, material requirements, manufacturing feasibility, and inspection criteria are reviewed before production.

Which international standards can be referenced for custom metal components?

Applicable references depend on the product and project requirements. They may include EJMA for metallic bellows expansion joints, ISO 10380 for corrugated metal hose assemblies, EN 14917 for metallic expansion joints, and relevant ASME requirements for piping or pressure equipment applications.

Can you manufacture multi-ply metal bellows for high-pressure applications?

Single-ply and multi-ply configurations can be evaluated according to required pressure, movement, spring rate, and fatigue conditions. The final design depends on material, dimensions, convolution geometry, operating temperature, and applicable design requirements.

How do you determine the suitable material for corrosive or high-temperature applications?

Material selection considers the working medium, chemical concentration, operating temperature, pressure, corrosion mechanisms, and required service conditions. Stainless steels and nickel-based alloys can be evaluated according to the specific application.

What quality inspection and documentation can be provided?

Depending on the agreed inspection scope, documentation may include EN 10204 3.1 material certificates, dimensional inspection records, PMI reports, pressure test certificates, leakage test records, NDT reports, and Certificates of Conformity (CoC).

Do you support prototypes, small-batch orders, and OEM production?

Custom projects can be evaluated for prototype development, small-batch manufacturing, replacement components, and OEM production. Tooling requirements, minimum order quantities, production lead times, and technical feasibility are confirmed according to product complexity and order specifications.

Request a Custom Engineering Review

Whether you need a new component developed from engineering drawings or a replacement for an existing metal bellows, expansion joint, or flexible metal hose, provide your application details for technical evaluation.

Send your drawings, samples, material requirements, operating pressure, temperature, and movement specifications. The engineering review can then establish a suitable product configuration, manufacturing approach, and inspection scope before quotation.