Metal Hose With Fixed Flange Ends

Metal Hose With Fixed Flange Ends
Product Introduction:
Metal Hose with Fixed Flange Ends absorbs thermal expansion, axial displacement, and severe mechanical vibration in high-pressure piping systems. As an experienced China manufacturer, we provide hydroformed corrugated stainless steel flexible hose assemblies with high-density wire braid sleeves and factory-welded fixed flanges for global industrial supply.
Send Inquiry
Description
Technical Parameters

Metal Hose with Fixed Flange Ends absorbs thermal expansion, axial displacement, and severe mechanical vibration in high-pressure piping systems. As an experienced China manufacturer, we provide hydroformed corrugated stainless steel flexible hose assemblies with high-density wire braid sleeves and factory-welded fixed flanges for global industrial supply.

Operating Limits & Core Specifications

  • Temperature Range: -196°C to +600°C (-320°F to +1112°F).
  • Hydrostatic Test Pressure: 1.5× Rated Working Pressure (100% factory tested).
  • Burst Pressure Safety Factor: 4× Working Pressure.
  • Pressure Envelope: Vacuum to high-pressure service (configured by braid layer count and nominal size).
  • Tubing Corrugation: Hydroformed annular profile (standard) or helical profile.
  • Media Compatibility: Steam, thermal oil, cryogenic fluids, aggressive chemicals, fuel gas, and exhaust media.

Sizing & Flange Configuration Matrix

Parameter Specifications & Available Options Technical / Selection Conditions
Nominal Diameter (DN) DN15 to DN300 (1/2" to 12") Matches pipeline nominal bore to prevent flow restriction.
Flange Standards ANSI B16.5 (150#, 300#)
DIN EN1092-1 (PN10, PN16, PN40)
JIS / GB options
Fixed flange configuration on both ends; custom drilling available.
Flange Facing Raised Face (RF), Flat Face (FF) RF standard; FF for cast iron or sensitive equipment flanges.
Hose Core Material SS304 (1.4301), SS316L (1.4404), SS321 (1.4541) SS316L for chloride/corrosive media; SS321 for high-temp cycling.
Wire Braid Layers Unbraided (vacuum/low-pressure)
Single Layer Braid (standard)
Double Layer Braid (high-pressure)
High-tensile SS304/SS316 braid restrains axial elongation under pressure.
Flange Material Carbon Steel (A105 / Q235), SS304, SS316L Carbon steel provides cost-effective strength in non-corrosive environments.
Bending Radius Static Minimum Bending Radius
Dynamic Minimum Bending Radius
Dynamic installations require longer overall length (OAL) to avoid fatigue failure.

Custom Manufacturing Options & OEM Supply

Fixed Flange Metal Flexible Hose assemblies can be customized by our factory to meet specific envelope limitations and OEM pressure requirements:

  • Overall Length (OAL): Custom length fabricated to exact millimeter or inch requirements.
  • Flange Surface Protection: Zinc plating, rust-inhibitive primer, or full passivation on carbon steel flanges.
  • Reinforcement Sleeves: External spring guard / armor guard installed over braid terminations to reduce localized bending stress.
  • Multi-Ply Construction: Multi-ply corrugations available for dynamic installations with severe flexural fatigue or extreme vibration.

Manufacturing & Quality Control

  • Automatic Longitudinal Seam Welding: Hydroformed tubes originate from TIG/argon-arc longitudinal welded stainless steel strip.
  • Hydroforming Process: Delivers uniform wall thickness across peaks and valleys for consistent flexibility and burst strength.
  • Flange Attachment Welding: Certified TIG welding joins the braid, inner core, and flange hub into a single structural unit.
  • 100% Leak Testing: Every assembly undergoes 100% hydrostatic or pneumatic leak testing prior to shipment.

Technical Inquiry Checklist

Provide the following parameters for pricing, CAD drawings, or lead-time estimates:

  1. Nominal Diameter (DN / NPS) and total overall length (OAL).
  2. Working Pressure and maximum operating/ambient Temperature.
  3. Conveyed Medium (gas, liquid, steam, chemical composition).
  4. Flange Specification (Standard, Pressure Class, Facing Type, Material).
  5. Movement Type (Static offset, thermal expansion, dynamic vibration).

Attach engineering drawings, isometric sketches, or nameplate photos with your inquiry.

 

Hot Tags: metal hose with fixed flange ends, China metal hose with fixed flange ends manufacturers, suppliers, factory, Axial Stainless Steel Bellows, elastic flexure components, extension spring components, mechanical elastic components, metal spring components, spring loaded metal components

Send Inquiry