Stainless Steel Pump Connector Hose

Stainless Steel Pump Connector Hose
Product Introduction:
Stainless steel pump connector hoses feature multi-ply AISI 304, 316L, or 321 corrugated bellows with single or double high-density wire braiding. Designed for pump inlet and discharge lines, they absorb vibration, compensate for thermal movement, and balance piping misalignment.
Send Inquiry
Description
Technical Parameters

Stainless steel pump connector hoses feature multi-ply AISI 304, 316L, or 321 corrugated bellows with single or double high-density wire braiding. Designed for pump inlet and discharge lines, they absorb vibration, compensate for thermal movement, and balance piping misalignment.

Performance Limits & Operating Conditions

  • Nominal Diameter (DN): DN15 to DN600 (1/2" to 24").
  • Pressure Ratings: PN10, PN16, PN25, PN40 / ASME Class 150, Class 300.
  • Operating Temperature Range: -196°C to +450°C (-320°F to +842°F).
  • Bellows & Braiding Materials:
    • AISI 304: Standard industrial water, HVAC, and non-corrosive fluid lines.
    • AISI 316L: High-chloride environments, chemical processing, and marine applications.
    • AISI 321: High-temperature steam and thermal oil lines.
    • Single vs. Double Braiding: Single-layer stainless steel mesh for PN16/Class 150; double-layer braiding for high pressure braided metal expansion joint applications (PN25–PN40 / Class 300) to prevent longitudinal extension under working pressure.

Movement Absorption & Limit Assembly Options

Movement Type Absorption Range Application Condition
Axial Compression / Extension ±10 mm to ±40 mm Varies by overall length (OAL) and nominal diameter.
Lateral Offset ±5 mm to ±25 mm Compensates for pump discharge and intake misalignment.
Angular Deflection 2° to 5° Accommodates minor angularities at pump nozzles.
Tie Rod / Limit Rod Assembly Optional / Mandatory Mandatory for high-pressure pump discharge lines to prevent bellows over-extension when pressure exceeds line anchor limits.

End Connection Standards & Configurations

  • Flanged Ends:
    • Standards: ASME B16.5, DIN EN 1092-1, JIS B2220, GB/T 9119.
    • Types: Fixed flanges, floating/loose flanges (Lap Joint) for bolt-hole alignment during installation.
    • Flange Materials: Carbon steel (Q235B / 20# / A105), AISI 304, AISI 316L.
  • Threaded Ends: Male/Female NPT or BSPT (DN15 to DN50 / 1/2" to 2").
  • Welding Ends: Butt-weld pipe ends (Schedule 40 / Schedule 80) for permanent inline welding.

Customization & Engineering Options

  • Overall Length (OAL): As an OEM stainless steel flexible pump connector manufacturer, we offer custom face-to-face dimensions to replace existing inline connectors without piping modifications.
  • Inner Liners: Smooth AISI 304/316L inner flow liners for media velocity exceeding 3 m/s or abrasive fluids.
  • Bellows Layer Configuration: Multi-ply bellows construction for higher cycle life under continuous vibration.

Quality Assurance & Factory Testing

  • 100% Pressure Testing: Hydrostatic testing at 1.5 times the design pressure or pneumatic leak testing prior to dispatch.
  • Welding Qualifications: TIG (GTAW) welding performed under qualified WPS/PQR standards.
  • Documentation Supplied: Material Test Reports (EN 10204 3.1 MTR), hydrostatic test certificates, and factory compliance certificates.

Request a Quote

As a custom flexible metal hose supplier, we provide rapid engineering support. To receive a quote and CAD drawings, submit your Nominal Diameter (DN), Working Pressure (PN/Class), Operating Temperature, Fluid Media, and required Overall Length (OAL) or existing connection photos.

 

Hot Tags: stainless steel pump connector hose, China stainless steel pump connector hose manufacturers, suppliers, factory, coil spring components, displacement compensation components, elastic leaf components, extension spring components, formed metal components, spring biased components

Send Inquiry