Custom edge welded bellows for vacuum valves are engineered specifically for high-vacuum (HV) and ultra-high-vacuum (UHV) valve motion feedthroughs, delivering maximum axial stroke within minimum installation envelopes. Each convolution is constructed from individually stamped metallic diaphragms, precision-welded at the inner and outer circumferences to achieve optimal flex-to-length ratios and minimal outgassing.
Technical Specifications & Compatibility Matrix
| Parameter / Dimension | Value / Standard | Operating Conditions / Selection Impact |
|---|---|---|
| Vacuum Level Compatibility | 10-3 mbar down to < 1 × 10-8 mbar | Suitable for UHV isolation valves, gate valves, angle valves, slit valves, and specialized welded bellows vacuum valve seals. |
| Helium Leak Rate Standard | ≤ 1 × 10-9 mbar·L/s | 100% helium mass spectrometer leak tested to prevent trace contamination in vacuum chambers. |
| Compression Ratio / Stroke | Up to 50%–70% of free length | Maximizes axial stroke when valve bonnet space is severely constrained. |
| Operating Temperature | Cryogenic up to 400°C | Dependent on selected diaphragm material and flange gasket configuration. |
| Standard Diaphragm Materials | SS304, SS316L, SS321, AM350, Inconel | SS316L for standard clean vacuum; AM350 high-yield alloy for applications requiring extreme cycle fatigue resistance. |
| Design Cycle Life | 10,000 to >1,000,000 cycles | Configured by pitch, wall thickness, single- or multi-ply design, and material choice. |
Customization & OEM Welded Bellows Assemblies
We provide complete OEM/ODM component integration, allowing you to source fully assembled sub-systems directly from our factory:
- Dimensions: Custom inner diameter (ID), outer diameter (OD), free length, and stroke length built to your housing envelope.
- Diaphragm Geometry: Flat-plate, ripple, or nested ripple profiles depending on stroke and spring rate requirements.
- End Fittings & Interfaces: Direct welding to standard CF, KF, or ISO flanges, as well as non-standard customer-supplied end fittings or valve bonnets.
- Component Supply: Machined end-plates, guide rods, and internal shafts integrated and tested before shipment.
Manufacturing Precision & Quality Control
With over 13 years of specialized metal bellows manufacturing experience and 37 sets of dedicated production and testing equipment, we maintain end-to-end quality control:
- Micro-Precision Welding: Precision micro-plasma and TIG welding setups ensure consistent bead width, low thermal distortion, and crack-free diaphragm joints.
- In-House Machining & Fabrication: Outfitted with 200-ton and 100-ton hydraulic presses, CNC lathes, and laser cutting equipment for complete control over end-plate tolerances.
- Traceable Inspections: Every batch undergoes strict material test report (MTR) verification, dimensional audits, step-by-step weld inspections, and ultrasonic cleaning prior to double-bagged clean room packaging.
Request a Technical Edge Welded Bellows Factory Quote
To evaluate pricing, lead time, or custom tooling feasibility, send us your 2D/3D engineering drawings (STEP/DWG) or your core design targets:
- Target Inner & Outer Diameters
- Required Axial Stroke & Compressed Length
- Operating Vacuum Level & Temperature Range
- Preferred Material Grade & Interface Type
Submit your specifications or sample photos directly to receive a comprehensive technical proposal and quotation from our engineering team.
Hot Tags: edge welded bellows for vacuum valves, China edge welded bellows for vacuum valves manufacturers, suppliers, factory, angular bellows, corrugated bellows assembly, high pressure bellows assembly, high vacuum metal bellows, industrial bellows, welded metal seal bellows

