Engineered for mechanical seal assemblies, edge welded bellows deliver up to 50% higher axial stroke efficiency than conventional formed bellows within compact seal cavities. As a direct China manufacturer, we support full custom OEM design and precision fabrication.
Technical Specifications & Operating Limits
| Parameter | Standard Range / Specification | Selection & Operational Impact |
|---|---|---|
| Operating Pressure | Full Vacuum up to 2.5 MPa (25 bar) | Standard single-ply design. Multi-ply configurations applied for higher differential pressure. |
| Temperature Range | -196°C to +425°C | Cryogenic to high-temperature fluid isolation based on selected alloy grade. |
| Stroke Efficiency | Up to 80% of extended length | High compression-to-length ratio allows shorter overall seal gland space. |
| Leak Rate Standard | < 1 × 10-9 mbar·l/s | 100% helium mass spectrometer leak tested prior to shipment. |
| Design Cycle Life | > 100,000 dynamic cycles | Baseline rating under rated operating pressure and axial deflection. |
Material Options & Custom Configuration
As an experienced OEM supplier, our welded bellows assemblies can be customized to match specific mechanical seal cartridges or pump housing dimensions:
- Diaphragm Alloys:
- 316L Stainless Steel: Standard corrosive resistance for general chemical and water service.
- AM-350: High-strength precipitation-hardened alloy for elevated pressure and dynamic responsiveness.
- Inconel 718: High-temperature and high-pressure service.
- Hastelloy C-276: Resistance to strong acids and harsh process media.
- Dimensional Customization: Inner Diameter (ID), Outer Diameter (OD), and total pitch engineered for custom welded bellows to fit non-standard seal glands.
- End Fittings: Custom end-caps, drive collars, and mating rings supplied pre-welded via micro-TIG or electron beam welding.
- Ply Configurations: Single-ply for maximum flexibility; multi-ply available for high pressure requirements.
Manufacturing & Quality Verification
- Micro-Welding Control: Diaphragm edges are precision-stamped and joined using micro-TIG or electron beam welding for uniform bead geometry.
- 100% Leak Testing: Every bellows core undergoes helium leak detection to confirm sealing integrity.
- Cleanliness Processing: Ultra-clean washing removes fabrication residue before packaging to protect fluid purity in pump and mixer applications.
Request a Technical Quote or Sample
Submit operating parameters (working medium, temperature range, design pressure, and seal gland dimensions) or engineering drawings to our OEM factory team. Technical proposals and material options will be provided based on your application requirements.
Hot Tags: edge welded bellows for mechanical seals, China edge welded bellows for mechanical seals manufacturers, suppliers, factory, corrugated bellows assembly, engineered metal bellows, Hydroformed Stainless Steel Bellows, Multi Ply Stainless Steel Bellows, stainless steel bellows hose, vacuum seal bellows

